15 Furniture Designs You Can Make With Plywood, HDHMR, PVC and Block Board

Introduction

While many homeowners believe interiors can be made entirely from plywood, modern design uses a range of engineered boards—like plywood, blockboard, HDHMR, and PVC—each chosen for a specific purpose. In premium Delhi NCR renovations, material selection is central. Leading this expertise is Quartier Studio, ranked among the top interior designers in Delhi and the best in NCR. The firm is also acclaimed as the top interior company in Noida. Their success is guided by directors such as Suhel Akhtar, Architect, and Raja Anuj Anand, Founder.

By supporting the board in the poor location, you might experience the problem of the bending doors, the swollen cabinets around the sink, the rough paint finish or broken shutters. We will even in this blog describe the type of board to be used in what areas in your home interiors, particularly:

• Shutters, kitchen cabinets
• Wardrobe and shutter carcass
• Doors (flush door and European door)
• Bathroom vanity units
• Wall panelling and TV panel
• Beds, sofas and chairs

It is by the end of this guide that you will be able to tell what material to request your carpenter or interior designer to apply to ensure that your home is not weak, short-lived and expensive.

Understanding the Main Board Types

It is important to understand the basic materials before selecting the right board for different kinds of furniture. Each material has its own advantages, durability, and best usage areas. Knowing these differences helps you choose the right material for a strong and long-lasting home interior.

1. Plywood

Plywood is manufactured by adhering several thin veneers (plies) of wood veneer with glue and the wooden grains should be oriented at right angles.

Key features:

• Strong and durable
• Good load-bearing capacity
• Fits well with structural sections such as carcasses and frames.
• Different grades (MR, BWR, Marine, etc.) are available.

Best used for:

• Kitchen
• Wardrobe
• Bed
• sofa frame
• Chairs
• Panelling base

Quartier Studio recommendation: Quartier Studio recommends using plywood because it is necessary to have load-bearing furniture. The best interior designers in Delhi NCR, Interior Design Companies In India, and Architecture Firms in Delhi recommend it.

2. Block Board

Blockboard consists of a core of wooden blocks placed edge-to-edge and sandwiched between wooden veneers. This construction makes it more resistant to bending and provides better dimensional stability, especially in tall shutters and long doors.

Key features:

• Lighter than solid plywood
• Greater stability of increased shutter sizes.
• Reduced risk of bowing/bending in long doors.
• Top laminates and veneers are good.

Best used for:

• Wardrobe shutters
• Kitchen shutters (laminated)
• Flush doors
• TV panels

Quartier Studio recommends: Using blockboard because blockboard is preferred because it remains stable even in tall wardrobes and heavy shutters, like in Top interior designers in Noida, Interior design firms in Noida and Best interior designers in Delhi NCR.

3. HDHMR Board

HDHMR is an abbreviation of High Density High Moisture Resistant board. The material is a heavier and more dense engineered version than normal MDF and is commonly utilized in contemporary modular interiors. Due to the fine fiber structure of HDHMR, it provides a smooth and perfect finish and it is particularly used in high-quality PU-painted furniture and designer shutters.

Key Features:

• Smooth and uniform surface
• SUited to PU paint, duco paint and CNC routing.
• Increased moisture resistance compared to normal MDF.
• Offers high-quality paint finishes on shutters and panels.

Best used for:

• PU paint kitchen shutters
• Wardrobe shutters
• CNC / fluted designs
• Wall panelling overlay
• Door skins

Quartier Studio recommendation: Quartier Studio is an experienced designer that favors HDHMR due to its ability to accommodate detailed CNC work, painted finishes and high-end designs, and that is why it is strongly advocated by the Interior Design Companies In India which are the Best interior designers in Delhi NCR and Architecture Firms In Delhi.

4. PVC / PVC Foam Board (PVC Board is also called Double PVC Board)

PVC board is a board made of plastic, which is specifically used in moisture-intensive places. It is also among the most water-resistant materials that can be used in interiors. Its non-absorbing and non-swelling properties ensure that it does not suffer issues such as fungal proliferation, compromise and consequential damage upon leaking, and deterioration over time. This is why it is more preferable to wooden boards in the most humid areas of the house.

Key Features:

• 100% water-resistant
• Termite resistant and borer resistant.
• Does not swell or stretch as wooden materials do.
• Easy to carry and lightweight.

Best used for:

• The kitchen has sink cabinets below the sink
• The bathroom vanity units and very wet parts

Quartier Studio recommendation: Experts in Quartier Studio say that PVC is best used in wet places, as it remains stable and unrepaired in wet places with high moisture content, as suggested by the Best interior designer in Noida, Top Architecture Firms in India and Interior company in Noida.

Which Board to Use Where? (Practical 14+ Point Guide)

And now we will relate the theory to the real interior work. The following is a basic breakdown in accordance with typical home furniture.

1. Kitchen Furniture

The kitchen is exposed to heat, moisture, heavy utensils, oil and cleaning chemicals. Selecting the appropriate board in this case is therefore very crucial.

A) Kitchen Carcass – Plywood

• The carcass of the kitchen (or the outer box or body of your cabinets) ought to be sturdy and waterproof
• BWR or Marine grade plywood is recommended
• It is easy to load, moist, and used every day, unlike most boards.

B) Kitchen Shutters—Use Block Board

For normal laminate finish:

• Use block board for shutters
• It remains in place better in high shutters and minimizes the possibility of bending.
• Cuts laminates and edge banding easily.

C) Kitchen Carcass in PU Paint – HDHMR Board

• In case you want a painted kitchen carcass (this is less frequently used but may be in places that are seen).
• Apply HDHMR on the parts that are visible.
• The plywood is smooth with HDHMR whereas plywood has a rough texture to PU paint.

D) Kitchen Shutters with PU Paint – HDHMR Board

• In high-grade, lacquered or smooth PU-coated kitchen shutters, use HDHMR board
• Greater CNC cutting with grooves or designs.
• Very smooth paint finish
• Reduced imperfections on the surface.

E) Area Beneath sink – Double PVC Board

• The cabinet is directly under the kitchen sink and has the highest exposure to water through leakages, cleaning and dampness.
• Here, use PVC board construction of twice the thickness.
• It makes the cabinet much more waterproof and long-lasting.
• Plywood or MDF under the sink should be avoided.

Quartier Studio Suggestion: According to Quartier Studio experts, the right material combination in kitchen interiors improves performance and durability, which is why Best interior designers in Delhi NCR, the top Interior company in Noida and Top interior designer in Noida recommend plywood, HDHMR and PVC in the correct positions.

2. Wardrobe Furniture

Wardrobes are dryer than kitchens but have bulky clothes, sliding parts and high shutters.

A) Wardrobe Carcass – Plywood

• For the bulk of the wardrobe Use plywood
• It is able to move the load of clothes, shelves and drawers with ease.
• Strong and long-lasting

b) Wardrobe Shutters—Wardrobes use Block Board

• Where there are laminated wardrobe shutters, use blockboard
• It is easier and more stable for a tall shutter
• Reduced bending as compared to solid plywood on a large size

C) Wardrobe Carcass of PU Paint – HDHMR Board (Visible Parts) Used

In case the wardrobe carcass sides or open sides are to be painted:

• Apply HDHMR to such visible surfaces.
• It will provide a superior final paint finish.

D) Wardrobe Shutters PU Paint and Fluted Design HDHMR Board

For stylish wardrobes with:

• PU paint
• Fluted designs
• CNC grooves and patterns

Use HDHMR board because:

• It is a fine CNC router
• Has a smooth, uniform surface to be painted in a perfect manner.
• Gives a modern, premium look

Quartier Studio Suggestion: According to professionals at Quartier Studio, wardrobes perform best and stay aligned longer when plywood, blockboard, and HDHMR are used correctly, which is why Best interior designers in Delhi NCR, Top architecture in india and best interior designer in noida follow this material combination.

3. Doors in Your Home

Doors are huge vertical surfaces; therefore, chances of bending and warping are good in case the wrong board is used.

A) Laminated Flush Door—Use Block Board

For a simple laminated door:

• Use a blockboard flush door
• The blockboard core prevents bending of large-sized doors
• Solid and heavy enough to be used on a regular basis

B) European Door – Block Board Core + HDHMR on Both Sides

For premium European-style doors:

• Use a blockboard core
• Laminate both sides with HDHMR sheets

This combination gives:

• Strength from block board
• Smooth surface and design flexibility from HDHMR

Quartier Studio Suggestion: According to Quartier Studio experts, a blockboard and HDHMR combination performs best for doors and prevents bending in the long run

4. Bathroom Vanity

• Bathrooms are regularly subjected to water and humidity.
• Bathroom vanity should be used with PVC board that is doubled.
• It will perform much better in wet conditions.
• Minimizes the risk of edema, fungus and injury.

Quartier Studio Suggestion: According to Quartier Studio experts, PVC is the safest material for bathroom vanities to prevent moisture damage.

5. Wall Panelling

To decorate a wall with grooves or textured paneling:

• Select plywood as the base to be attached on the wall.
• Moreover, apply CNC-cut HDHMR board.

This gives you:

• Strong base from plywood
• Fancy designs and creamy paint by HDHMR.

Quartier Studio Suggestion: Professionals at Quartier Studio recommend plywood + HDHMR for wall panelling because it offers better strength and finishing.

6. TV Panel

• The TV panel is rather an aesthetic part compared to a load-bearing structure.
• Blockboard is a great choice
• It is steady and light and is compatible with laminates, veneers or even paint.

Quartier Studio Suggestion: According to Quartier Studio, blockboard is the preferred material for a smooth and durable TV panel surface.

7. Bed, Sofa and Chairs—Use Plywood

• In the case of structural furniture with heavy weight, the best alternative is plywood.
• It is able to cope with weight as well as movement over the years.

Use it for:

• Bed frames
• Sofa frames
• Chair structures

Quartier Studio Suggestion: Quartier Studio professionals suggest plywood for furniture frames because it handles loads efficiently.

Why Choose Quartier Studio?

Quartier Studio is one of the leading Interior Design Companies in India and Best interior designers in Delhi NCR, operating across Noida and Delhi. The firm is led by renowned professionals:

• Suhel Akhtar – Director & Architect
• Raja Anuj Anand – Founder & Director

They have designed numerous premium homes, delivered luxury projects and are known for combining functionality, aesthetics and durability. Quartier Studio stands among the best interior designers in Delhi, Home Renovation in Delhi, Interior company in Noida, and Architecture Firms In Delhi NCR, focusing on material quality and smart execution.

Conclusion

Choosing the right board material for every part of your home is essential for strong, durable and long-lasting interiors. Each material has a different purpose—whether it is plywood for carcass frames, blockboard for shutters, HDHMR for painted panels or PVC for wet areas. When used correctly, these boards improve functionality, prevent bending or swelling and enhance the final finish of your home furniture.

Today, many professionals across Best interior designers in Delhi NCR, Interior Design Companies in India, Interior company in Noida and Top interior designer in Noida suggest using a combination of these boards to achieve the best results. The right material selection not only increases the lifespan of your interiors but also makes your kitchen, wardrobe, bathroom vanity and furniture more stylish and efficient. This smart material approach is also widely followed in Home Renovation in Delhi, Architecture Firms in Delhi and modern interior projects, ensuring a premium finish and long-term performance for every space in the house.